SPYDER EKO-VALVE® PIN W/ CUP SEAL

Name: SPYDER EKO-VALVE® PIN W/ CUP SEAL
Brand: SPYDER
SKU: 5768
Price: 139.0 ZAR
Availability: InStock

R 139.00

Quantity

history

Safe & Secure Payment Options

If your marker has an air leak down the barrel. Check the items below. Reference the manual as needed.

Unscrew the vertical frame screw that holds the front plug in place (ref page 11 of the manual) in order to remove it
Next, you can remove the Valve Spring, Valve Pin, Cup Seal Guide and Cup Seal
Inspect the Cup Seal for damage as this will generally be the cause of the issue. To replace it, unscrew it from the Valve Pin
Wipe everything down with a clean rag & inspect the Front Plug oring for damage. Replace if needed
Be sure to apply a drop of oil to the oring before re-assembling
- Front Plug oring: #15mm - 80

If the above doesn't fix your issue, try the following:
Start by removing your C02 & degassing your marker
With the bolt out, remove the Striker Plug by turning it clockwise
Next, remove the Striker Spring
To remove the rest of the components (Striker Bolt, Striker Buffer), squeeze & hold the trigger, then pop them out using a hammering type motion into your palm (reference the video)
Replace the Striker Bolt o-ring & apply a drop of oil
- Note: Trigger is squeezed in order to prevent damage to the oring on the Striker Bolt during removal
  - Striker Bolt oring: #14.3mm x 1.7mm 70pu

Please have a look here, to see how these parts are installed / replaced;
Here's for the Victor, Xtra, Aggressor & MR100;

and here is The SONIX and XTRA models (which are the same);