Ledlenser AF8R Work Floodlight: 4000 lumens with hybrid power that runs and recharges at the same time
Cordless work lights have one weakness, which is that the battery decides when the job ends. Corded lights have a different one, which is that they only work where the cable reaches. The AF8R refuses the choice. Hybrid Power means it runs from the internal battery, runs from the mains, and recharges while it is running, so a light that has been plugged in all morning is at full charge the moment you need to unplug it and walk somewhere else.
What hybrid power changes day to day
The practical effect is that you stop rationing. Nobody drops a cordless light to a lower setting to preserve battery when the light is plugged into a wall, so you work at the output the task actually needs. When the work moves, you pick it up mid job and keep going with a full pack behind you. The 4700 mAh 10.8 V battery takes about 6 hours to charge from flat, but that number stops mattering much once the light is spending its idle time on mains.
Where the Ledlenser AF8R work floodlight earns its place on finish work
Five colour temperatures between 3000 K and 6500 K, combined with a CRI of 80, make this a light you can judge colour under. Painters checking coverage, panel beaters matching a repair, cabinetmakers reading grain and stain, and anyone doing final inspection all run into the same trap, which is work that looks correct under cheap blue tinted site lighting and wrong in daylight the next morning. Setting the temperature close to the light the work will finally be seen in removes most of that risk.
The brightness ladder
Full output is 4000 lumens reaching up to 95 metres for around 1.5 hours. From there it steps down to 3200 lumens for 2.25 hours, 2300 lumens for 3.25 hours, 1600 lumens for about 5 hours, and 500 lumens for up to 14 hours. The useful observation is that 1600 lumens is already more light than most interior tasks require, and it runs a full working day.
What the weight tells you
The AF8R comes in at 1870 grams with its battery and around 1650 grams without it. That split is worth noticing, because it means roughly 220 grams is the power source and everything else is housing, optics and thermal mass. A light built that way holds its output steady instead of fading after ten minutes under load, and the aluminium body doubles as the heatsink rather than relying on vents that would compromise the IP67 rating.
Glare is the other half of the problem
Multi Concentrated Light Technology directs output where it is aimed instead of scattering it, which keeps light on the work and out of your eyes. The removable diffuser goes on when the light sits close to the surface you are working on, spreading it evenly rather than producing a bright hotspot surrounded by shadow. Between the two, the AF8R stays comfortable to work under for hours, which is a different requirement from being bright.
Mounting and handling
The body measures 275 by 179 by 41 millimetres, slim enough to slide in beside other gear, and weighs 1870 grams with the battery. An integrated magnet grips steel, the fold out stand adjusts to angle the beam, and a standard quarter inch tripod thread takes it up to height. Setting it above head level and aiming down is usually the fastest way to remove shadows from a work area entirely.
Site rated
Chemical resistant aluminium housing, IP67 dust and water protection, 1.5 metre drop resistance and an operating range from minus 20 to plus 40 degrees Celsius. Temperature Control and Cooling Technology keeps output stable under sustained use, the Memory Function returns to your last setting, and an optional Bluetooth controller adds remote operation for lights mounted out of reach.
Features
- Powerful rechargeable area floodlight for professional work, construction sites and workshops.
- Hybrid Power operation using rechargeable battery or direct mains power.
- Charges while operating from mains power for uninterrupted use.
- Maximum output of 4000 lumens.
- Up to 14 hours runtime on the lowest brightness setting.
- Tunable White Light with five colour temperatures from 3000 K to 6500 K.
- CRI 80 for accurate colour rendering during detailed work.
- Multi-Concentrated Light Technology for efficient, directed illumination with reduced glare.
- Removable diffuser for softer, more even area lighting.
- Five selectable brightness levels.
- Integrated magnet for secure mounting to metal surfaces.
- Fold-out adjustable stand with standard 1/4-inch tripod mount.
- USB-C rechargeable integrated Li-ion battery.
- Memory Function remembers the last selected setting.
- Transportation Lock prevents accidental activation.
- Temperature Control and Cooling Technology for reliable performance.
- Chemical-resistant aluminium housing with durable Work Series construction.
- Optional Bluetooth controller compatibility for remote operation.
- IP67 dustproof and waterproof rating.
- 1.5-metre drop resistance.
- Operating temperature range from -20°C to +40°C.
Specifications
- Brightness Levels:
- 100%: 4000 lumens, up to 95 m beam distance, ~1.5 hours runtime.
- 75%: 3200 lumens, ~80 m, ~2.25 hours.
- 50%: 2300 lumens, ~70 m, ~3.25 hours.
- 25%: 1600 lumens, ~60 m, ~5 hours.
- Low (10%): 500 lumens, ~30 m, up to 14 hours runtime.
- Light Source: Multiple white LEDs.
- Battery: Internal Li-ion (4700 mAh / 10.8 V / ~50.76 Wh).
- Charging Time: ~360 minutes (6 hours) via USB-C.
- Power Adapter: Included for mains/hybrid use.
- Dimensions: 275 mm (W) × 179 mm (H) × 41 mm (D), slim profile for portability.
- Weight: 1870 g (with battery) / ~1650 g (without).
- Materials: Robust aluminum alloy housing with black/yellow Work series styling.
- Durability: IP67 (dust-tight and waterproof), drop-tested from 1.5 m, operating temperature -20°C to +40°C.
