AJAX WATER STOP 1/2 VALVE - WHITE
Not a drop of problems
WaterStop automatically shuts off the water in 7 seconds at a facility with an Ajax security system if LeaksProtect or a third-party water leak detector is triggered. The device combines a high-quality valve and a powerful electric actuator. You can control WaterStop and check its status from anywhere in the world — all you need is an Internet connection and an Ajax app. You can also create a scenario to shut the water off at a specific time or when arming the system.
Water shut-off in 7 seconds
WaterStop is equipped with a powerful actuator of up to 8.5 N•m torque. This is enough to shut off even a stuck-up valve without the risk of damaging it. Under normal operating conditions, WaterStop shuts off the water in 7 seconds after the command or automatically by scenario whenever Leaks protection or a third-party sensor detects flooding. In a setting with a ¾-inch pipe and 2.5 bar of pressure in the water supply system, less than 1 liter of water will leak out.
Inside the water leak prevention system based on Ajax, every device operates either on pre-installed batteries or has a backup power supply in case of a blackout. The system monitors the facility 24/7, giving you complete peace of mind that the property is protected.
-
Shuts even a stuck-up valve
-
Suitable for facilities with unstable or no power supply
Protected on every level
WaterStop is suitable for controlling both hot and cold water supplies and is ready to operate in challenging environments. With additional protection, WaterStop withstands overcurrent and notifies about overheating, making it impossible for the electric actuator to fail even when the shutoff valve is stuck.
-
Overheating notification
-
Overcurrent protection
One-stop solid brassware
WaterStop is available in three versions with different valve options: ½” (DN 15), ¾” (DN 20), or 1” (DN 25). Those are the most common sizes used to cover any demand, from residential to business facilities. Also, the WaterStop electric actuator is compatible with all ball valves that meet the ISO 5211 standard. So when it comes to specific tasks and sizes, a plumber installs an available on every market compatible valve, and the installation engineer easily connects the electric actuator.
Installation without any construction involved
The myth about anti-flood systems being difficult to install is busted. Ajax minimized an expensive, long, and dusty experience for clients and professionals. Cutting-edge hardware and software engineering allowed us to implement advanced capabilities with significant autonomy in a compact size.
Miniature Ajax water leak detectors suit hard-to-reach places and do not require enclosure disassembling — they can be installed on a horizontal surface without attaching. The shutoff valve is installed in line with an existing plumbing system. The actuator unit does not require wires and fits limited spaces, having four possible installation positions towards the valve.
Batteries
No additional cable routing is required: WaterStop is autonomous and does not depend on the 110 or 220 V~ grid. With a 3-year battery life and no wires, the installation process takes much less time and effort. Ajax apps will notify an installation engineer and users about the low battery level in advance. The batteries are replaceable — so after three years, the installer pops the new ones, and WaterStop continues to operate as usual.
-
Up to 3 years of operation with pre-installed batteries
-
In-app low battery warning
-
Replaceable CR123A batteries
External power supply
When a constant shut-off valve operation is required or the installation place uses extreme temperatures, the batteries can discharge faster. An option to connect a 9–12 V⎓ power supply will come in handy, eliminating frequent battery replacement and reducing service costs. And the pre-installed batteries will serve as a backup, so even in a power outage WaterStop continues to operate without any problem.
-
9–12 V⎓ power supply connection
-
Pre-installed batteries as a backup power source
Unique wireless technologies
The Ajax system uses two-way secure radio communication based on Jeweller proprietary protocol. It supports block cipher encryption and device authentication on every session with the hub to prevent sabotage, spoofing, or data theft.
Ajax wireless technology has up to 1,100 meters of radio signal communication range in an open space, making it on average longer than competing solutions from different manufacturers. Automatic power adjustment makes it energy efficient by not using the maximum power of radio transmitters in system devices on a regular basis. It is also more stable, using less noisy radio frequencies. For protection against radio interference and signal interception, Ajax hubs use frequency hopping: the system automatically changes frequency within a band and notifies the security company and users about the jamming.
-
Up to 1,100 meters of radio communication range with a hub
-
Encrypted two-way radio communication
-
Notifications about jamming and connection loss
Scaled and comprehensive
Use the ReX range extender for complex radio signal conditions like large houses with thick walls or warehouses with several buildings. REX boosts the range of all Ajax devices and manages their communication with the hub via Jeweller. And REX2 assures stable communication even through steel and concrete via Ethernet using the wire as the additional communication channel. Up to 5 range extenders can operate within one Ajax system to expand the network twice as big, covering underground parking, basements, and metal hangar's.
-
Up to 5 range extenders within one system
-
Ethernet as an alternative communication channel
Intuitive Ajax apps provide all information in real-time from anywhere the Internet is available, on a smartphone or PC. Users can check the device state and control the water supply remotely — any action can be done with one click.
The Ajax system instantly notifies about events with informative notifications: security companies and users know exactly which device triggered, when and where it happened. The system controls each device state and reports if there is a malfunction or if it's time to replace the batteries.
WaterStop can be configured at any time from anywhere, as long as there is an Internet connection. It takes seconds to change the settings or reconfigure the scenario.
The event log records 500 recent events within the system. The data is explicit with the device, time, and description of the event. It helps to reconstruct the actual event and find the causes to obtain comprehensive information for the insurance company.
Full monitoring for the building
With PRO Desktop, building admin staff can observe security, automation, and smart home devices. Device statuses, event log, and microclimate data — the operator has a complete picture in one intuitive interface, all informative and centralized.
And photo verification of alarms from detectors of the MotionCam lineup will help to find out the situation at the protected facility and quickly respond to it. The installer can remotely change the settings and provide additional services according to the object specifics.
Advanced automation for greater safety
WaterStop is a part of the Ajax ecosystem. Using scenarios , it can interact with automation devices and PhOD detectors of the MotionCam lineup. Whether it’s a minor water leak or a massive flooding, WaterStop shuts off the water in a matter of seconds.
At the same time, MotionCam (PhOD) sends pictures to Ajax apps to identify what causes the water leak and assess the possible damage. And to prevent emergencies, automatic water supply control will turn off the water when no one is using it — a reliable combination of security and automation that runs like a Swiss watch.
SPECS:
Compatibility
Hubs
Radio signal range extenders
Communication
Jeweller communication technology
- Two-way communication.
- Protection against device spoofing.
- Block encryption featuring a floating key.
- Instant notifications.
- Remote configuration via Ajax apps.
Radio frequency bands
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
Maximum effective radiated power (ERP)
Radio signal modulation
Radio communication range
Radio signal encryption
Frequency hopping
Operating components
Shutoff valve
Electric actuator
Mounting platform
Mounting lockers
- standard (pre-installed)
- anti-sabotage
Water shut-off
Fields of application
Operating fluid
Material
Connection type and thread
- ½" (DN 15, 15 mm)
- ¾" (DN 20, 20 mm)
- 1" (DN 25, 25 mm)
Operating liquid temperature range
Mounting platform
Lever on mounting platform
Water shut-off
Torque
Operating pressure
Shut-off speed
Remote control
Manual control
Additional features
Installation
- does not require tools and enclosure disassembling
- 4 possible mounting positions of electric actuator towards the valve
- anti-sabotage locker to complicate unauthorized dismount of an electric actuator
LED indication
Automation scenarios
- alarm reactions
- security mode change reactions
- scheduled actions
- temperature scenarios
- humidity scenarios
- CO2 level scenarios
- by pressing Button
- by pressing LightSwitch
Stuck prevention
Overheating notification
Recommendations
Anti-sabotage protection
Protection against spoofing
Communication failure detection
Tampering alarm
Mounting lockers for fastening
- Standard locker (pre-installed) — fixes an electric actuator on a shutoff valve. Removes easily for a quick access to the valve.
- Anti-sabotage locker — used instead of a standard locker. Securely fixes an electric actuator on the valve to complicate an unauthorized dismount.
Power supply
Pre-installed batteries
Optional external power supply
Enclosure
Dimensions
Weight
Operating temperature range
Operating humidity
Colours
Complete set
AJAX WATER STOP 1/2 VALVE - WHITE
Not a drop of problems
WaterStop automatically shuts off the water in 7 seconds at a facility with an Ajax security system if LeaksProtect or a third-party water leak detector is triggered. The device combines a high-quality valve and a powerful electric actuator. You can control WaterStop and check its status from anywhere in the world — all you need is an Internet connection and an Ajax app. You can also create a scenario to shut the water off at a specific time or when arming the system.
Water shut-off in 7 seconds
WaterStop is equipped with a powerful actuator of up to 8.5 N•m torque. This is enough to shut off even a stuck-up valve without the risk of damaging it. Under normal operating conditions, WaterStop shuts off the water in 7 seconds after the command or automatically by scenario whenever Leaks protection or a third-party sensor detects flooding. In a setting with a ¾-inch pipe and 2.5 bar of pressure in the water supply system, less than 1 liter of water will leak out.
Inside the water leak prevention system based on Ajax, every device operates either on pre-installed batteries or has a backup power supply in case of a blackout. The system monitors the facility 24/7, giving you complete peace of mind that the property is protected.
-
Shuts even a stuck-up valve
-
Suitable for facilities with unstable or no power supply
Protected on every level
WaterStop is suitable for controlling both hot and cold water supplies and is ready to operate in challenging environments. With additional protection, WaterStop withstands overcurrent and notifies about overheating, making it impossible for the electric actuator to fail even when the shutoff valve is stuck.
-
Overheating notification
-
Overcurrent protection
One-stop solid brassware
WaterStop is available in three versions with different valve options: ½” (DN 15), ¾” (DN 20), or 1” (DN 25). Those are the most common sizes used to cover any demand, from residential to business facilities. Also, the WaterStop electric actuator is compatible with all ball valves that meet the ISO 5211 standard. So when it comes to specific tasks and sizes, a plumber installs an available on every market compatible valve, and the installation engineer easily connects the electric actuator.
Installation without any construction involved
The myth about anti-flood systems being difficult to install is busted. Ajax minimized an expensive, long, and dusty experience for clients and professionals. Cutting-edge hardware and software engineering allowed us to implement advanced capabilities with significant autonomy in a compact size.
Miniature Ajax water leak detectors suit hard-to-reach places and do not require enclosure disassembling — they can be installed on a horizontal surface without attaching. The shutoff valve is installed in line with an existing plumbing system. The actuator unit does not require wires and fits limited spaces, having four possible installation positions towards the valve.
Batteries
No additional cable routing is required: WaterStop is autonomous and does not depend on the 110 or 220 V~ grid. With a 3-year battery life and no wires, the installation process takes much less time and effort. Ajax apps will notify an installation engineer and users about the low battery level in advance. The batteries are replaceable — so after three years, the installer pops the new ones, and WaterStop continues to operate as usual.
-
Up to 3 years of operation with pre-installed batteries
-
In-app low battery warning
-
Replaceable CR123A batteries
External power supply
When a constant shut-off valve operation is required or the installation place uses extreme temperatures, the batteries can discharge faster. An option to connect a 9–12 V⎓ power supply will come in handy, eliminating frequent battery replacement and reducing service costs. And the pre-installed batteries will serve as a backup, so even in a power outage WaterStop continues to operate without any problem.
-
9–12 V⎓ power supply connection
-
Pre-installed batteries as a backup power source
Unique wireless technologies
The Ajax system uses two-way secure radio communication based on Jeweller proprietary protocol. It supports block cipher encryption and device authentication on every session with the hub to prevent sabotage, spoofing, or data theft.
Ajax wireless technology has up to 1,100 meters of radio signal communication range in an open space, making it on average longer than competing solutions from different manufacturers. Automatic power adjustment makes it energy efficient by not using the maximum power of radio transmitters in system devices on a regular basis. It is also more stable, using less noisy radio frequencies. For protection against radio interference and signal interception, Ajax hubs use frequency hopping: the system automatically changes frequency within a band and notifies the security company and users about the jamming.
-
Up to 1,100 meters of radio communication range with a hub
-
Encrypted two-way radio communication
-
Notifications about jamming and connection loss
Scaled and comprehensive
Use the ReX range extender for complex radio signal conditions like large houses with thick walls or warehouses with several buildings. REX boosts the range of all Ajax devices and manages their communication with the hub via Jeweller. And REX2 assures stable communication even through steel and concrete via Ethernet using the wire as the additional communication channel. Up to 5 range extenders can operate within one Ajax system to expand the network twice as big, covering underground parking, basements, and metal hangar's.
-
Up to 5 range extenders within one system
-
Ethernet as an alternative communication channel
Intuitive Ajax apps provide all information in real-time from anywhere the Internet is available, on a smartphone or PC. Users can check the device state and control the water supply remotely — any action can be done with one click.
The Ajax system instantly notifies about events with informative notifications: security companies and users know exactly which device triggered, when and where it happened. The system controls each device state and reports if there is a malfunction or if it's time to replace the batteries.
WaterStop can be configured at any time from anywhere, as long as there is an Internet connection. It takes seconds to change the settings or reconfigure the scenario.
The event log records 500 recent events within the system. The data is explicit with the device, time, and description of the event. It helps to reconstruct the actual event and find the causes to obtain comprehensive information for the insurance company.
Full monitoring for the building
With PRO Desktop, building admin staff can observe security, automation, and smart home devices. Device statuses, event log, and microclimate data — the operator has a complete picture in one intuitive interface, all informative and centralized.
And photo verification of alarms from detectors of the MotionCam lineup will help to find out the situation at the protected facility and quickly respond to it. The installer can remotely change the settings and provide additional services according to the object specifics.
Advanced automation for greater safety
WaterStop is a part of the Ajax ecosystem. Using scenarios , it can interact with automation devices and PhOD detectors of the MotionCam lineup. Whether it’s a minor water leak or a massive flooding, WaterStop shuts off the water in a matter of seconds.
At the same time, MotionCam (PhOD) sends pictures to Ajax apps to identify what causes the water leak and assess the possible damage. And to prevent emergencies, automatic water supply control will turn off the water when no one is using it — a reliable combination of security and automation that runs like a Swiss watch.
SPECS:
Compatibility
Hubs
Radio signal range extenders
Communication
Jeweller communication technology
- Two-way communication.
- Protection against device spoofing.
- Block encryption featuring a floating key.
- Instant notifications.
- Remote configuration via Ajax apps.
Radio frequency bands
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
Maximum effective radiated power (ERP)
Radio signal modulation
Radio communication range
Radio signal encryption
Frequency hopping
Operating components
Shutoff valve
Electric actuator
Mounting platform
Mounting lockers
- standard (pre-installed)
- anti-sabotage
Water shut-off
Fields of application
Operating fluid
Material
Connection type and thread
- ½" (DN 15, 15 mm)
- ¾" (DN 20, 20 mm)
- 1" (DN 25, 25 mm)
Operating liquid temperature range
Mounting platform
Lever on mounting platform
Water shut-off
Torque
Operating pressure
Shut-off speed
Remote control
Manual control
Additional features
Installation
- does not require tools and enclosure disassembling
- 4 possible mounting positions of electric actuator towards the valve
- anti-sabotage locker to complicate unauthorized dismount of an electric actuator
LED indication
Automation scenarios
- alarm reactions
- security mode change reactions
- scheduled actions
- temperature scenarios
- humidity scenarios
- CO2 level scenarios
- by pressing Button
- by pressing LightSwitch
Stuck prevention
Overheating notification
Recommendations
Anti-sabotage protection
Protection against spoofing
Communication failure detection
Tampering alarm
Mounting lockers for fastening
- Standard locker (pre-installed) — fixes an electric actuator on a shutoff valve. Removes easily for a quick access to the valve.
- Anti-sabotage locker — used instead of a standard locker. Securely fixes an electric actuator on the valve to complicate an unauthorized dismount.
Power supply
Pre-installed batteries
Optional external power supply
Enclosure
Dimensions
Weight
Operating temperature range
Operating humidity
Colours
Complete set
Share and get 15% off!
Simply share this product on one of the following social networks and you will unlock 15% off!