Scope and mount rings not included, neither the 0.5l carbon fibre tank, nor the externally adjustable regulator. These are sold separately and shown otherwise for illustration and suggestive purposes only. Supplied w/ a 0.35l aluminium tank.
The Priest was carefully designed. The results were carefully measured and estimated.
We designed a special equipment for measurements which helped us to achieve the best results possible.
Multi Calibers
Priest is available in 4.5 (.177), 5.5 (.22), 6.35 (.25), 7.62 (.30) calibers and arrow barrel.
No matter in which caliber you purchase the rifle, all you need to do, to change the caliber, is to buy a new caliber kit which contains barrel, pellet pusher and shroud cap which are all the necessary parts to do the transformation. (Barrel exchange tool is not included in the kit).
When designing the rifle we had compactness and lightness in mind. The Priest measures 710mm in length and weighs only 3kg with the bottle and 2,1kg without it. Because of the smart design, the bottle can be carried on your waist, connected with a very flexible high pressure hose to the rifle.
Plenum Extension gives you an extra 22ccm of regulator air volume. Total of 57ccm of regulated air volume. Available as an addition. Compatible with older Priests.
Cocking handle allows you to quickly cock the rifle, because of the smartly designed and positioned cocking mechanism which is on the left front side of the rifle. This enables you to never remove your finger from the trigger. Straight pull speeds up your cocking action because all you need to do is pull the handle straight back and return it to its original position.
Priest comes with a 320cc buddy bottle which has a working pressure of 300bar. On top of it it has a pressure regulator which is by default set to 125bar. This combination allows us to make a whole lot of consistent shots.
To satisfy the most advanced shooters, we have developed a new pressure regulator for Priest series which allows the shooter to adjust pressure externally without having to empty the tank.
Pressure can be regulated from 50 bar to 200 bar.
It can be bought as an addition and can be fitted on all the Priests (old or new) and other rifles with the same thread. Thread on the bottle side is M18x1.5. Thread on the output side is G1/2-14.
Externally Adjustable Pressure Regulator works best with the Extended Stock which allows the shooter to adjust hammer spring tension to desired setting, so optimal performance can be achieved.
Rifle is equipped with a 170mm of picatinny rail so you can fit whichever optics you prefer. Another picatinny is located on the bottom of the front body which can be used for any number of accessories, such as bipod. There are also two dovetails located on the side of the front body.
Technical Specifications;
|
Calibre
|
5.5 (.22)
|
|
Energy
|
45J
|
|
Air Capacity
|
320cc
|
|
Max filling pressure
|
300bar
|
|
Plenum Volume
|
35ccm
|
|
Bottle
|
Removable aluminium buddy bottle
|
|
Magazine capacity
|
11
|
|
Max pellet length in magazine (which still fits in the magazine):
|
12mm
|
|
Max pellet length single shot (which can fit in to the barrel without the magazine):
|
16mm
|
|
Shots per fill (With 0.35L bottle
|
100
|
|
Trigger
|
2 stage, adjustable down to 200g
|
|
Cocking system
|
Straight pull
|
|
Grip
|
Standard AR15 grip (must be without beaver tail)
|
|
Barrel
|
Lothar Walther (LW) 24", choked
|
|
Arrow Barrel
|
Available as an addition (Arrows X7 2212)
|
|
Caliber Kits
|
Different caliber kits can be bought as an addition so you can easily change a calibre of your rifle
|
|
Pressure regulator
|
By default set to 125bar.
|
|
Externally Adjustable Pressure Regulator
|
available as an addition.
|
|
Trigger safety
|
Yes
|
|
Optics
|
Picatinny rail
|
|
Picatinny rail length
|
170mm
|
|
Pressure gauge
|
On the bottle which shows pressure in the bottle
|
|
Total length
|
710mm
|
|
Max height
|
157mm
|
|
Max width
|
35mm
|
|
Bottle diameter
|
61mm
|
|
Weight
|
3kg with buddy bottle, 2,1kg without buddy bottle
|
|
Charging type
|
Foster coupling
|
